Different Ways to Press HTV Onto a Hoodie Sweatshirt
If you enjoy creating custom apparel, check out these different ways to press HTV onto a hoodie sweatshirt.
We'll be pressing three designs onto two sweatshirts. You can find these sarcastic, commercial free, svg designs in some of our favorite mini SVG bundles below!
To manage the bulk of the material and thick seams of a hoodie sweatshirt, use a pressing pillow to raise up the areas that you're pressing.
Allow the excess bulk of the sweatshirt to hang off the edge of the pressing pillow and/or heat press.
Pressing on the Hood
You can easily press HTV on the hood of your sweatshirt.
Many hoods have a thick middle seam running through it.
Avoid HTV pressing mistakes by avoiding that area completely and pressing the design to one side.
Pressing on the back (under the hood!)
Try pressing the HTV design transfer on the back of the hoodie sweatshirt.
If you want the design to be seen while the person is wearing the hoodie, make sure to place the design lower than where the hood falls.
You can press a hidden HTV design transfer underneath the hood! This way can only see the design is when the hood is being worn.
PressHTV on the sleeve
This skull design looks perfect when added to the sleeve of my hoodie sweatshirt.
Press the sleeve flat first, to create a crease down the center of the sleeve.
You can then use this to line to center your design on the sleeve.
Have fun being creative with your HTV designs and hooded sweatshirts.
Grab the mini bundles with hoodie sweatshirt svg designs here: Kiss My Sass, Sassy with Crown, Bad Moms CEO
Watch the project video below: